Table V – Dew Point

<< Click to Display Table of Contents >>

Navigation:  »No topics above this level«

Table V – Dew Point

Table V – Dew Point

 

 

HOW TO USE THIS CHART: If the air temperature is 80°F and the RH is 65%, the dew point is 66°F.  No coating should be applied unless the surface temperature of the slab is 71°F or higher.

 

DEW POINT: Temperature at which moisture will condense on the surface of an object.  No coatings should be applied unless surface of the concrete slab is a minimum of 5 degrees above this point.  Ambient temperature must be maintained during curing, or can be falling, but never rising.

 

RELATIVE HUMIDITY (RH): The amount of water vapor in a mixture of air and water vapor. It is defined as the ratio of the partial pressure of water vapor in an air-water mixture to the saturated vapor pressure of water at a prescribed temperature.

 

AMBIENT AIR TEMPERATURE: The ambient temperature is a non-specific phrase used to describe the outside temperature. When taking the temperature with a thermometer, you are getting a general idea of the temperature of the surrounding air without taking into account the humidity or wind in the air.